The article provides step-by-step guidance on effectively utilizing the K12 portable karaoke speaker and microphone and maximizing its functionalities.
Product Diagram and Function
The Step to Use the Speaker
- Power on / off: Long press 2-3s to power the speaker on/ off, Short price Vol+ or Vol- to adjust the volume of the speaker.
- Bluetooth Connection: Press the M button to switch to Bluetooth mode, it will be indicated “Bluetooth”, and search for the Bluetooth name “K12” to pair.
- Previous / Next Song: Long Press the + or – button for the next/previous song.
- Play music via TF card / U-disk: Prepare a micro SD card / U-disk loaded with MP3 songs, insert the card or U-disk into the socket, and it will auto-play.
- Echo Control: Short press the “ECHO” button to cycle to adjust the echo volume. There are 3 levels of echo: 0%, 50%, and 100%
- Light Control: Long press the “Lights” button to turn the light on / off, Short press for light mode changing.
The Step to Use the Microphone
- Power on / off: Long press 2-3s to power the microphone on / off, The mic and speaker will auto-connect each other when both power on. Short press to play/pause music from the speaker remotely.
- How to adjust the microphone volume. Short press the + or – button to increase or decrease the volume of Mic, there are 5 levels of mic volume. When reaching the maximum or minimum volume, it will indicate “du”.
- Magic Sound Effect: Short press the “magic sounds” button to change the magic voice: baby, male, female, and Monster. Long press the “magic sounds” 2-3s for music vocals on / off ( part of music for IOS not supported)
How to Charge
- Take out the Type-C charging cable included in the package
- Plug the Type-C end of the cable into the machine or microphone, and another USB end into the normal USB charging adaptor/ PC Port (5V, 1A-2A)
- When the speaker/mic is being charged, the indicator light turns red. Once it is fully charged, the indicator light will turn off.
FAQS
1. Bluetooth can not be paired
- Press the M button to switch to Bluetooth mode first
- For distant Bluetooth connection, try to adjust the distance between the speaker and the microphone
- The speaker is already paired with other microphones. First, turn off the Bluetooth of the other microphone and restart the speaker, try to pair with the microphone again.
2. The Mic is no sound
- Try to charge the Mic and use it
- Try to power the Mic on
- The speaker and mic are not connected successfully, please restart them and increase the volume of the mic and try again.
3. The speaker no sound when playing music:
- Check whether the Bluetooth is connected successfully
- Check if the sound was paused via the mic end, if yes, short press the power button of the mic to play/pause the music.
- Check if the phone volume is turned up
- Short press the + button of the speaker to increase the speaker’s volume
4. Presence of noise
- Environmental noise, or mobile phone signal interference, Adjust the distance between the karaoke machine and the cellphone, and adjust the distance between the mic and speaker.
5. Long press the power button and the machine/mic indicator does not light up
- Try to charge the machine/mic and use it.
6. Howling
- Check if the microphone is too close to the speaker.
- To avoid howling, please do not keep the mic too close to the speaker, if too close, it will make screaming and strange sounds, which is relatively common sound feedback, so try to avoid microphones close to speakers.
Enjoy your moment
7 Responses
Is there anything else I can do to try and fix the microphone? I’ve rebooted the mic and the speaker multiple times, I’ve raised the volume to max and lowered to min, and raised to max again. I’ve changed effects, but alas no luck in getting the mic to make any sounds other than the speaker does beep when I get to max or min volume and it beeps when I short press the effects button… The “built in music” I believe is played from the mic to the speaker(?) and I can’t get it to play anymore either… So the only sounds I’m getting from the mic now is when the volume max/min, or the effect button is quick pressed… I’ve charged both devices fully and like I said I’ve rebooted them both multiple times. The mic blue light is switching to solid shortly after turning on; however the speaker blue light continues to flash, even though I’ve just turned the speaker on and have not pressed the M button, which according to your instructions above is what you have to press to put it into Bluetooth mode…?
I don’t know which factory your product is produced by. Usually the microphone and speaker are automatically connected. After adjusting the sound, you will hear your own voice calling the microphone. If there is no sound from the microphone at all, it may be that the IC of the receiver is broken.
Same problem.. Mic does not connect with the Speaker.. been trying to restart Ang both are fully charged yet this mic doesn’t connect with the speaker.. but the speaker is too good.. the only problem is the microphone
My friend told me an issue yesterday, he mentioned the microphone and the speaker do not match. The reason is that the manufacturer placed the wrong microphone during packaging.
This kinda product requires a microphone to transmit and a speaker to receive. The transmitting and receiving chips are one-to-one, and different styles of products are not universal. Therefore, once the microphone is misplaced, the microphone and speaker cannot be connected.
So now the microphone and speaker cannot be connected for the following reasons, maybe:
1) Pack the wrong microphone
2) The receiving chip is broken
Microphone is not connected to the speaker the blue light indicator just keeps on flicker, is there any way to connect the microphone to the speaker the seller is not responding anymore its been 3 days already and its my 1st time to open and used it then this is the problem.
I can’t use it..
The only solution is to return it or ask the seller to replace it.
This design is steller! Youu obviously know how too keep a reader entertained.
Betwen your wwit aand your videos, I was almost moved to start my own blog (well, almost…HaHa!) Great job.
I really enjoyed what you had tto say, and more than that, how you presented it.
Too cool! https://www.waste-NDC.Pro/community/profile/tressa79906983/